| MRC |
Requirement Statement |
Characteristics |
| AZDC |
DISTANCE FROM LOOP CENTER TO TONGUE END |
0.891 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
| BZTP |
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER |
0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| AZCY |
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE |
0.641 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| AZDE |
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE |
0.672 INCHES MINIMUM AND 0.735 INCHES MAXIMUM |
| AAAP |
CUSHIONING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND FLAME RESISTANT |
| ABMZ |
DIAMETER |
0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| AXWJ |
FASTENING DEVICE TYPE |
SELF-LOCKING HEXAGON NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,T3 FED SPEC ALL MATERIAL RESPONSES OR QQ-A-250/5,T4 FED SPEC ALL MATERIAL RESPONSES BAND |
| ABPX |
MATERIAL THICKNESS |
0.051 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 BAND |
| MATT |
MATERIAL |
RUBBER SILICONE CLASS Q CUSHION |
| AAAN |
INTEGRAL NUT TYPE AND QUANTITY |
1 SELF-LOCKING EQUAL LENGTH TONGUES |
| BZTN |
LOOP INSIDE DIAMETER |
0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| BZTQ |
LUG HOLE DIAMETER |
0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM |
| AHMM |
LUG WIDTH |
0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 3303 FED SPEC SINGLE MATERIAL RESPONSE CUSHION |
| ABMK |
OVERALL WIDTH |
0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| AAAL |
TONGUE HOLE TYPE |
ROUND, UNTHREADED |
| STYL |
STYLE DESIGNATOR |
RIGHT HAND CLAMP & BRACKET |
