| MRC |
Requirement Statement |
Characteristics |
| AFEC |
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH |
0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| CWXC |
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER |
1.280 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| BYGG |
BLOCK HEIGHT |
0.670 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| AXPE |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES |
1.500 INCHES NOMINAL |
| CWWM |
CLAMPING HOLE DIAMETER |
0.834 INCHES MINIMUM ALL HOLES AND 0.854 INCHES MAXIMUM ALL HOLES |
| CWTD |
CLAMPING HOLE QUANTITY |
2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/2 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM |
| AZGM |
MOUNTING FACILITY |
UNTHREADED HOLE |
| ABTB |
MOUNTING HOLE DIAMETER |
0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| ABTJ |
MOUNTING HOLE QUANTITY |
1 |
| ABKW |
OVERALL HEIGHT |
1.400 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
2.430 INCHES MINIMUM AND 2.470 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
0.900 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
