| MRC |
Requirement Statement |
Characteristics |
| AFEC |
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH |
0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| CWXN |
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER |
1.000 INCHES NOMINAL |
| CWXC |
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER |
0.370 INCHES NOMINAL |
| BYGG |
BLOCK HEIGHT |
0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| CWYM |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES |
3.130 INCHES NOMINAL |
| CWYH |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES |
2.380 INCHES NOMINAL |
| CWXZ |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES |
0.500 INCHES NOMINAL |
| AXPC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES |
6.240 INCHES MINIMUM AND 6.260 INCHES MAXIMUM |
| CWYS |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SIXTH CLAMPING HOLES |
3.880 INCHES NOMINAL |
| CWYC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES |
1.750 INCHES NOMINAL |
| CWWM |
CLAMPING HOLE DIAMETER |
0.250 INCHES MINIMUM THIRD HOLE AND 0.256 INCHES MAXIMUM THIRD HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.250 INCHES MINIMUM FIFTH HOLE AND 0.256 INCHES MAXIMUM FIFTH HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.250 INCHES MINIMUM FOURTH HOLE AND 0.256 INCHES MAXIMUM FOURTH HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.250 INCHES MINIMUM SIXTH HOLE AND 0.256 INCHES MAXIMUM SIXTH HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.500 INCHES MINIMUM FIRST HOLE AND 0.506 INCHES MAXIMUM FIRST HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.500 INCHES MINIMUM SECOND HOLE AND 0.506 INCHES MAXIMUM SECOND HOLE |
| CWTD |
CLAMPING HOLE QUANTITY |
11 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-P-15035,TY FBM MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-P-15035,TY FBI MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
PLASTIC |
| AZGM |
MOUNTING FACILITY |
UNTHREADED HOLE |
| ABTB |
MOUNTING HOLE DIAMETER |
0.280 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| ABTJ |
MOUNTING HOLE QUANTITY |
2 |
| ABKW |
OVERALL HEIGHT |
3.000 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
7.000 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
0.452 INCHES MINIMUM AND 0.548 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
FIVE ADDITIONAL CLAMPING HOLES 0.250 MIN TO 0.256 MAX INCHES DIA |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-V-173 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
VARNISH |
