| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.250 INCHES NOMINAL |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.220 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
ALQ-135B COUNTERMEASURE |
| ADPR |
BODY THICKNESS |
1.900 INCHES NOMINAL |
| ADNU |
CORNER RADIUS |
0.120 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
FLAT |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
3.031 INCHES NOMINAL AND 2.625 INCHES NOMINAL AND 3.375 INCHES NOMINAL AND 2.937 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
2.250 INCHES NOMINAL AND 3.000 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
SPECIAL MARKING |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
12 |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
9 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/8 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
THREADED HOLE |
| ABRY |
LENGTH |
21.470 INCHES NOMINAL |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| FEAT |
SPECIAL FEATURES |
HOLE LEGEND:A-E,'A' DIA REQUIRES 0.138-32 UNC 2B THD AND IS CBORED 0.312 IN.,'B' DIA 0.1885 TO 0.1895 IN. THRU,'C' DIA IS 0.103 TO 0.105 IN. & CBORED 0.187 IN. X 0.093 IN. DP 'D' DIA IS 0.1885 TO 0.1895 IN. & 0.156 DP,'E' DIA IS 0.220 IN. & 0.156 IN. DP |
| ABGL |
WIDTH |
8.000 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-23377 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-8326 MIL SPEC 2ND TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PRIMER AND PAINT POLYURETHANE |
