| MRC |
Requirement Statement |
Characteristics |
| AFEC |
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH |
0.192 INCHES NOMINAL |
| CWXN |
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER |
0.938 INCHES NOMINAL |
| CWXC |
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER |
0.250 INCHES NOMINAL |
| BYGG |
BLOCK HEIGHT |
1.057 INCHES NOMINAL |
| CWYH |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES |
2.093 INCHES NOMINAL |
| CWXZ |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES |
0.937 INCHES NOMINAL |
| AXPC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES |
2.500 INCHES NOMINAL |
| CWYC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES |
1.500 INCHES NOMINAL |
| CWWM |
CLAMPING HOLE DIAMETER |
0.190 INCHES MINIMUM THIRD HOLE AND 0.192 INCHES MAXIMUM THIRD HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.250 INCHES MINIMUM FIRST HOLE AND 0.254 INCHES MAXIMUM FIRST HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.250 INCHES MINIMUM SECOND HOLE AND 0.254 INCHES MAXIMUM SECOND HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
1.000 INCHES MINIMUM FOURTH HOLE AND 1.004 INCHES MAXIMUM FOURTH HOLE |
| CWTD |
CLAMPING HOLE QUANTITY |
4 |
| MATT |
MATERIAL |
PLASTIC |
| AZGM |
MOUNTING FACILITY |
UNTHREADED HOLE |
| ABTB |
MOUNTING HOLE DIAMETER |
0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| ABTJ |
MOUNTING HOLE QUANTITY |
2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
G-4104BFA,GRUMMAN AEROSPACE MFR REF SINGLE MATERIAL RESPONSE |
| ABHP |
OVERALL LENGTH |
3.320 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
0.380 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR |
