| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
26.8098 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.0598 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.500 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
NUT |
| CSSQ |
FIRST LEG ANGLE |
135.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.380 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.440 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.000 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.0598 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
4.1598 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.0598 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHLF |
SECOND LEG WIDTH |
0.500 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
FIRST LEG HAS NOTCH IN HOLE SECOND LEG HAS EXTENDED BENT PORTION WITH 0.280 IN. DIA HOLE |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
