| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
3.075 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.075 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
9.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.436 INCHES MINIMUM AND 0.443 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
6.000 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
9.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.075 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.075 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
GUSSET CENTER SECTION |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
GUSSET SECOND LEG |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
6.075 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.075 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
9.000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
