| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.063 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.500 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.750 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.200 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.203 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.200 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.580 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.700 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS AND TAPERED |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/11,T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/11,T6511 FED SPEC 2ND MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.700 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
TWO INLINE MTG HOLES 0.098 IN. DIA BOTH LEG REINFORCED W/0.125 IN. RADIUS FILLET |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
