| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
5.185 INCHES MINIMUM AND 5.215 INCHES MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
0.380 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
0.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.190 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.300 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.300 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.120 INCHES MINIMUM AND 1.160 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11,T651 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
THREADED |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| ADLL |
SECOND LEG LENGTH |
1.120 INCHES MINIMUM AND 1.160 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.300 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
FIRST AND SECOND LEG W/THD MTG HOLES 0.190-32UNF-2B W/CBORE 0.250 DIA BY 0.135 IN. DP AND CSK 0.395 IN. DIA BY 82 DEG LOCATED ON OUTER FACES OF LEGS THREE THD MTG HOLES IN CENTER LEG 0.112-40UNC-2B THRU LOCATED ON LONGITUDINAL CENTERLINE AND CENTERED W/1 |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-83286 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PLASTIC POLYURETHANE |
