| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
ELECTRONIC ASSEMBLY,WARHEAD |
| ADPR |
BODY THICKNESS |
0.140 INCHES NOMINAL |
| ADNU |
CORNER RADIUS |
0.120 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECESS, SAME SHAPE AS THE PERIPHERY |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
1.820 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
1.820 INCHES NOMINAL |
| ADPN |
FIRST RECESS INSIDE HEIGHT |
0.340 INCHES NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.576 INCHES MINIMUM AND 0.577 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.194 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-596 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-601 FED SPEC 2ND MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABRY |
LENGTH |
2.320 INCHES MINIMUM AND 2.360 INCHES MAXIMUM |
| ADQB |
SECURING DEVICE TYPE |
SPECIAL |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, FOUR HOLES |
| ABGL |
WIDTH |
2.320 INCHES MINIMUM AND 2.360 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
