| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.063 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.500 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.570 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
NUT |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.220 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,T3 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.220 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLL |
SECOND LEG LENGTH |
1.000 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.500 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
RIGTH HAND NUT POSITION |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PLASTIC EPOXY AND PLASTIC POLYAMIDE |
