| MRC |
Requirement Statement |
Characteristics |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
2.180 INCHES MINIMUM AND 2.260 INCHES MAXIMUM |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
2.210 INCHES NOMINAL |
| ADPR |
BODY THICKNESS |
0.090 INCHES NOMINAL |
| ADNU |
CORNER RADIUS |
0.120 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
SQUARE OR RECTANGULAR RECESS |
| CBBL |
FEATURES PROVIDED |
OBSERVATION FACILITY |
| ADPN |
FIRST RECESS INSIDE HEIGHT |
1.410 INCHES NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.090 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
CLOSED VERTICAL SLOT |
| ADPQ |
INSIDE CORNER RADIUS |
0.120 INCHES NOMINAL |
| ADJU |
INSIDE LENGTH |
5.050 INCHES NOMINAL |
| ADJT |
INSIDE WIDTH |
4.250 INCHES NOMINAL |
| ABRY |
LENGTH |
5.230 INCHES MINIMUM AND 5.260 INCHES MAXIMUM |
| ADQB |
SECURING DEVICE TYPE |
SPECIAL |
| ABGC |
SLOT WIDTH |
0.157 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| ABGD |
SLOT LENGTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
1 ADDITIONAL HOLE 0.422 IN. DIA 2.200 IN. FROM EDGE ALONG W AND 1.000 IN. FROM BOTTOM |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, ONE CENTER HOLE |
| ABGL |
WIDTH |
4.430 INCHES MINIMUM AND 4.460 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
