| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
3.000 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
1.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.386 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.529 INCHES MINIMUM AND 0.543 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.150 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.790 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
3.250 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
3.150 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
EXTENDED FLAT |
| MATT |
MATERIAL |
STEEL COMP 1018 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.620 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.250 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
100.0 DEGREES NOMINAL |
| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
4.380 NOMINAL INCHES |
| ADLL |
SECOND LEG LENGTH |
5.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHLH |
SECOND LEG END WIDTH |
1.120 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.263 INCHES MINIMUM AND 0.273 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.500 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
FRIST LEG IRREGULAR SHAPE |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
TT-E-490 FED SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ENAMEL SEMIGLOSS |
