| MRC |
Requirement Statement |
Characteristics |
| AFEC |
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH |
0.310 INCHES NOMINAL |
| CWXN |
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER |
0.720 INCHES NOMINAL |
| CWXC |
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER |
0.310 INCHES NOMINAL |
| BYGG |
BLOCK HEIGHT |
0.610 INCHES NOMINAL |
| CBSM |
CABLE DIAMETER FOR WHICH DESIGNED |
0.250 INCHES NOMINAL FOURTH HOLE |
| CBSM |
CABLE DIAMETER FOR WHICH DESIGNED |
0.250 INCHES NOMINAL THIRD HOLE |
| CBSM |
CABLE DIAMETER FOR WHICH DESIGNED |
0.375 INCHES NOMINAL FIRST HOLE |
| CBSM |
CABLE DIAMETER FOR WHICH DESIGNED |
0.375 INCHES NOMINAL SECOND HOLE |
| CWYH |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES |
0.820 INCHES NOMINAL |
| CWXZ |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES |
0.620 INCHES NOMINAL |
| CWYC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES |
0.700 INCHES NOMINAL |
| AXPE |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES |
2.970 INCHES NOMINAL |
| CWWM |
CLAMPING HOLE DIAMETER |
0.250 INCHES NOMINAL FOURTH HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.250 INCHES NOMINAL THIRD HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.375 INCHES NOMINAL FIRST HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.375 INCHES NOMINAL SECOND HOLE |
| CWTD |
CLAMPING HOLE QUANTITY |
7 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 |
| AZGM |
MOUNTING FACILITY |
UNTHREADED HOLE |
| ABTB |
MOUNTING HOLE DIAMETER |
0.198 INCHES NOMINAL |
| ABTJ |
MOUNTING HOLE QUANTITY |
2 |
| ABKW |
OVERALL HEIGHT |
2.190 INCHES MINIMUM AND 2.310 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
3.590 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
0.628 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
INCL TWO REINFORCING CHANNELS AND TWO CORK AND RUBBER CUSHION PANELS,AMS 3252 CEMENTED TO BLOCK FACES BLOCK C/O THREE SECTIONS W/TWO ROWS OF HOLES AT THE INTERSTICES FOUR HOLES IN ONE ROW AND THREE HOLES IN THE OTHER ROW SECOND ROW HOLES INCL TWO W/0.5 |
