| MRC |
Requirement Statement |
Characteristics |
| AFEC |
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH |
0.250 INCHES NOMINAL |
| CWXN |
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER |
0.250 INCHES NOMINAL |
| CWXC |
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER |
0.540 INCHES NOMINAL |
| BYGG |
BLOCK HEIGHT |
0.250 INCHES NOMINAL |
| CWXZ |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES |
0.520 INCHES NOMINAL |
| CWYC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES |
0.860 INCHES NOMINAL |
| CWWM |
CLAMPING HOLE DIAMETER |
0.125 INCHES MINIMUM SECOND HOLE AND 0.130 INCHES MAXIMUM SECOND HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.250 INCHES MINIMUM FIRST HOLE AND 0.255 INCHES MAXIMUM FIRST HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.280 INCHES MINIMUM THIRD HOLE AND 0.285 INCHES MAXIMUM THIRD HOLE |
| CWTD |
CLAMPING HOLE QUANTITY |
3 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 T6 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AZGM |
MOUNTING FACILITY |
UNTHREADED HOLE |
| ABTB |
MOUNTING HOLE DIAMETER |
0.200 INCHES MINIMUM AND 0.206 INCHES MAXIMUM |
| ABTJ |
MOUNTING HOLE QUANTITY |
1 |
| ABHP |
OVERALL LENGTH |
1.380 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
0.500 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
