| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.188 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
1.093 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLK |
FIRST LEG LENGTH |
0.563 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.109 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL COMP 1020 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.156 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.125 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.156 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.563 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.093 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-16232 TY M CL 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE MANGANESE |
