| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
EXTENDED FLAT |
| AHPW |
FIRST LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5510 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
91547-2-161-161-02 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
