| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
OPTICAL IMPROVEMENT PROGRAM FOR TARGET ACQUISITION DESIGNATION SIGHT |
| AHQB |
CENTER SECTION THICKNESS |
0.088 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.922 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.319 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.188 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
1.318 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.109 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.231 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.125 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.114 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.110 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.438 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5643 ASSN STD ALL MATERIAL RESPONSES |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.096 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.096 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHLH |
SECOND LEG END WIDTH |
0.152 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.079 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.241 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.100 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.192 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
