| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
F100PW0229 ENGINE |
| AHQB |
CENTER SECTION THICKNESS |
0.050 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.624 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
30.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.221 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.163 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.050 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
COMPRESSOR INTERMED CASE ASSY |
| MATT |
MATERIAL |
TITANIUM ALLOY |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4911 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.746 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.182 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.746 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.274 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.050 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.157 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
