| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.063 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.630 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.490 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
27.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.310 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.270 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.690 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.925 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.050 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLY |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH |
0.550 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.170 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.470 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
27.0 DEGREES NOMINAL |
| AHLX |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
0.550 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.680 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.188 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.023 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
1ST END HAS 90.0 DEGREE ANGLE 0.290 NOM. IN. TO THE RIGHT OF CENTER WIDTH,0.550 NOM. IN. FROM END ALONG LENGTH 2ND END CENTER HOLE IS 0.715 NOM. IN. DIA. |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
