| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.087 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
3.060 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.595 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.279 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.672 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.310 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.310 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
3.260 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.878 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CUT OUT |
| AHPW |
FIRST LEG THICKNESS |
0.087 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 321 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
TURNED EDGE SECOND LEG AND GUSSET SECOND LEG |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.340 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.450 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.600 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
1.440 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.087 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
3.300 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
0.070 IN. HOLE DIA SECOND LEG ALONG W ONE PLACE 0.180 IN. MIN AND 0.186 IN. MAX HOLE DIA FOUR PLACES IN 1.767 IN. BOLT CIRCLE DIA ALL IN SECOND LEG |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
