| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
14.000 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.062 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
14.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.658 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/8 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.880 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.000 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
94.0 DEGREES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
10.000 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
14.000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TY 1 OR TY 2,CL 1 OR CL 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
