| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.150 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
3.250 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.400 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.089 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.428 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.750 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.125 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
3.250 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/11,T651 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/8,T651 FED SPEC 2ND MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
THREADED AND PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWNN |
SECOND LEG CUTOUT LENGTH |
0.480 INCHES NOMINAL |
| CWNX |
SECOND LEG CUTOUT WIDTH |
2.290 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CUT OUT |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLL |
SECOND LEG LENGTH |
0.720 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.150 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
3.250 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
SECOND LEG HAS TWO NOTCHES INSIDE OF CUTOUTS,0.188 IN. MIN AND 0.193 IN. MAX HOLE DIA TWO PLACES CENTER SECTION |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
