| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.063 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
3.000 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.12 RADIANS NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
2.500 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLK |
FIRST LEG LENGTH |
0.400 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
3.000 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL COMP 301 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AJFQ |
SECOND LEG END RADIUS |
0.062 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
0.12 RADIANS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
5.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.327 INCHES MINIMUM AND 0.334 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
3.500 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
RSECOND LEG OFFSET,1.000 IN. LG,0.690 IN. W,HAS ONE HOLE,0.249 IN. MIN DIA AND 0.255 IN. MAX DIA 0.380 IN. DISTANCE FROM EDGE TO HOLE CENTER ALONG W TWO HOLES IN CENTER SECTION,0.198 IN. MIN DIA AND 0.204 IN. MAX DIA |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
