| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.156 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
2.375 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.177 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.500 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.167 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.438 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.156 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.375 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-637 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
COPPER ALLOY 464 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN AND THREADED |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.167 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.438 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.164 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.500 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.156 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.375 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
