| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.280 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.160 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.750 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
0.920 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.170 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.160 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.060 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL COMP 303 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.125 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.660 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.910 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.340 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.340 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.160 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
ONE SLOT ON SECOND LEG,1.300 IN. LG BY 0.375 IN. W |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 TY 1 FED SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
