| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
3.120 INCHES MINIMUM AND 3.160 INCHES MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
0.200 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
4.320 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
NUT |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.410 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.720 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.880 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.200 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
4.320 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.880 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
TURNED EDGE BOTH LEGS |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.880 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.200 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
CENTER SECTION 1 HOLE 0.567 IN. MIN,0.571 IN. MAX DIA W/NUT,1 SMALL HOLE 0.280 IN. DIA |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-53039 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PLASTIC POLYURETHANE |
