| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.1196 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
1.594 INCHES MINIMUM AND 1.656 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.344 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.1196 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
48-00005-711,CAGEC 64678 MFR REF SINGLE MATERIAL RESPONSE |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| ADLL |
SECOND LEG LENGTH |
1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.1196 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
49-00005-101,CAGEC 64678 MFR REF SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ZINC |
