| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
5.625 INCHES MINIMUM AND 5.687 INCHES MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
0.179 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
4.350 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.19 RADIANS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
3.100 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.620 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.625 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.179 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
4.350 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.620 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL COMP 1009 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A569 ASSN STD SINGLE MATERIAL RESPONSE |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
GUSSET BOTH LEGS |
| CSSR |
SECOND LEG ANGLE |
0.19 RADIANS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.620 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.179 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-53039 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PLASTIC POLYURETHANE |
