| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.130 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
1.465 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.150 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.279 INCHES MINIMUM AND 0.287 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.130 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.190 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A576 COMP 1015 TO 1025 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A108 COMP 1015 TO 1025 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A27 GR 65-35 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.380 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.030 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.410 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| SFTT |
SURFACE TREATMENT |
PAINT |
