| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
4.430 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.1875 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
11.380 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.1875 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
11.380 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.000 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLR |
SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH |
8.360 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.810 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.510 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
4.180 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.690 NOMINAL INCHES |
| ADLL |
SECOND LEG LENGTH |
2.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.1875 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
11.380 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
CENTER SECTION HAS APERATURE 1.250 IN. DIA,4 MTG HOLES 0.190 IN. MIN AND 0.210 IN. MAX DIA AND 2 MTG HOLES 0.271 IN. MIN AND 0.291 IN. MAX DIA |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| SFTT |
SURFACE TREATMENT |
PAINT |
