| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
2.410 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.190 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.900 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
168.0 DEGREES NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.550 INCHES MINIMUM AND 0.557 INCHES MAXIMUM |
| AHQQ |
FIRST LEG END WIDTH |
0.380 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.196 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.300 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.750 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.120 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-327-T6 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK AND PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.440 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.640 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.180 INCHES MINIMUM AND 1.200 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.850 INCHES MINIMUM AND 1.870 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
