| MRC |
Requirement Statement |
Characteristics |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
1.153 INCHES NOMINAL |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.367 INCHES NOMINAL |
| ADNU |
CORNER RADIUS |
0.875 INCHES NOMINAL |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
1.000 INCHES NOMINAL |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
0.946 INCHES NOMINAL |
| ADPN |
FIRST RECESS INSIDE HEIGHT |
0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM |
| ABKU |
FLANGE THICKNESS |
0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.168 INCHES MINIMUM AND 0.182 INCHES MAXIMUM |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
22 |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
15 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 356.0 |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABRY |
LENGTH |
11.040 INCHES MINIMUM AND 11.100 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4218 ASSN STD SINGLE MATERIAL RESPONSE |
| ADQB |
SECURING DEVICE TYPE |
SPECIAL |
| FEAT |
SPECIAL FEATURES |
7 ADDITIONAL HOLES IN MIDDLE SECTION SILICONE SPONGE RUBBER TAPE ON UNDESIDE-2 PLACES |
| ABGL |
WIDTH |
7.825 INCHES MINIMUM AND 7.885 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-83286 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PAINT POLYURETHANE |
