| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
PACER DAWN |
| AHQB |
CENTER SECTION THICKNESS |
0.062 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.800 INCHES MINIMUM AND 1.810 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.092 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.000 INCHES MINIMUM AND 1.040 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.760 INCHES MINIMUM AND 0.800 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.062 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL COMP 304 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.062 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.760 INCHES MINIMUM AND 0.800 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
