| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.1195 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
1.690 INCHES MINIMUM AND 1.930 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
25.0 RADIANS NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
0.440 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.1197 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.630 INCHES MINIMUM AND 1.750 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 1009 OR STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTMA366 ASSN STD 1ST MATERIAL RESPONSE OR ASTMA569 ASSN STD 2ND MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.375 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.658 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.125 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.560 INCHES MINIMUM AND 0.680 INCHES MAXIMUM |
| AHMA |
SECOND LEG SLOT WIDTH |
0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHPX |
SECOND LEG THICKNESS |
0.1197 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.440 INCHES MINIMUM AND 2.560 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
171 MIL STD ALL TREATMENT RESPONSES |
