| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
4.500 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.460 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
2.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.749 INCHES MINIMUM AND 0.751 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.590 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.407 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.780 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL CO |
| ACHY |
MOUNTING HOLE TYPE |
THREADED AND PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A576 ASSN STD ALL MATERIAL RESPONSES |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.285 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.375 NOMINAL INCHES |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.375 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.160 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.250 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.428 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.000 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
0.7485-0.7505 IN. DIA HOLE WITH 1.50-1.56 IN. DIA CBORE SURROUNDING THE HOLE WHICH IS CENTRALLY LOCATED BETWEEN THE TWO MOUNTING HOLES IN THE SECOND LEG OPTIONAL MATERIAL: INVESTMENT CASTING,IC-1020 OR IC-1030,NOMALIZED,MIL-S-22141 APPLY SOLID FILM LUBR |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE AND TT-C-490,TY 3 FED SPEC 3RD TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE AND PAINT |
