| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
2.660 INCHES MINIMUM AND 2.900 INCHES MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
0.250 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.190 INCHES MINIMUM AND 1.231 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
66.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.190 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.560 INCHES MINIMUM AND 0.680 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.190 INCHES MINIMUM AND 1.310 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
3.500 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM |
| AHLM |
FIRST LEG SLOT WIDTH |
0.370 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL OR STEEL COMP M1020 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN AND THREADED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTMA36 ASSN STD 1ST MATERIAL RESPONSE OR ASTMA575 ASSN STD 2ND MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.625 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
4.000 NOMINAL INCHES |
| ADLL |
SECOND LEG LENGTH |
5.630 INCHES MINIMUM AND 5.870 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.250 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.190 INCHES MINIMUM AND 1.310 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
