| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
2350-01-305-0028 |
| AHPZ |
CENTER SECTION HEIGHT |
1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
0.190 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
5.190 INCHES MINIMUM AND 5.310 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.251 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
6.440 INCHES MINIMUM AND 6.560 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.375 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.440 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
6.940 INCHES MINIMUM AND 7.000 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.190 INCHES MINIMUM AND 1.310 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/7,H32 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/11 FED SPEC 2ND MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.190 INCHES MINIMUM AND 1.310 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.190 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
