| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.125 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
11.220 INCHES MINIMUM AND 11.400 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
1.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLK |
FIRST LEG LENGTH |
0.500 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
11.220 INCHES MINIMUM AND 11.400 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/9,T52 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6063 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| ADLL |
SECOND LEG LENGTH |
0.500 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
CENTER SECTION HAS 3 HOLES 0.343 IN. MIN AND 0.403 IN. MAX DIA HOLE LOCATION,1.530 IN. MIN AND 1.590 IN. MAX FROM HOLE CENTER TO FIRST EDGE ALONG LENGTH 0.590 IN. MIN AND 0.650 IN. MAX FROM HOLE CENTER TO FIRST EDGE ALONG WIDTH 3.345 IN. MIN AND 3.405 |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
