| MRC |
Requirement Statement |
Characteristics |
| AFEC |
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH |
0.312 INCHES NOMINAL |
| CWXN |
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER |
0.499 INCHES NOMINAL |
| CWXC |
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER |
0.969 INCHES NOMINAL |
| BYGG |
BLOCK HEIGHT |
0.625 INCHES NOMINAL |
| CWYH |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES |
3.235 INCHES MINIMUM AND 3.265 INCHES MAXIMUM |
| CWXZ |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES |
1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM |
| AXPC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES |
1.375 INCHES NOMINAL |
| CWYC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES |
2.307 INCHES MINIMUM AND 2.327 INCHES MAXIMUM |
| CWWM |
CLAMPING HOLE DIAMETER |
0.560 INCHES NOMINAL ALL HOLES |
| CWTD |
CLAMPING HOLE QUANTITY |
4 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/8 T6 OR T6511 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/11 T651 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/9 T5 FED SPEC 2ND MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 |
| AZGM |
MOUNTING FACILITY |
UNTHREADED HOLE |
| ABTB |
MOUNTING HOLE DIAMETER |
0.342 INCHES MINIMUM AND 0.372 INCHES MAXIMUM |
| ABTJ |
MOUNTING HOLE QUANTITY |
2 |
| ABHP |
OVERALL LENGTH |
4.190 INCHES MINIMUM AND 4.310 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
0.560 INCHES MINIMUM AND 0.680 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR |
