| MRC |
Requirement Statement |
Characteristics |
| AFEC |
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH |
0.560 INCHES NOMINAL |
| CWXN |
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER |
0.500 INCHES NOMINAL |
| CWXC |
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER |
1.000 INCHES NOMINAL |
| BYGG |
BLOCK HEIGHT |
0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| CWYM |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES |
3.970 INCHES MINIMUM AND 4.030 INCHES MAXIMUM |
| CWYH |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES |
2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM |
| CWXZ |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES |
0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| AXPC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES |
3.000 INCHES NOMINAL |
| CWYC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES |
1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM |
| CWWM |
CLAMPING HOLE DIAMETER |
0.280 INCHES NOMINAL FIRST HOLE0.400 INCHES NOMINAL SECOND HOLE |
| CWTD |
CLAMPING HOLE QUANTITY |
5 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-3065,-3BC70A14B24E034F17 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE |
| AZGM |
MOUNTING FACILITY |
UNTHREADED HOLE |
| ABTB |
MOUNTING HOLE DIAMETER |
0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| ABTJ |
MOUNTING HOLE QUANTITY |
2 |
| ABHP |
OVERALL LENGTH |
4.820 INCHES MINIMUM AND 4.940 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
1.060 INCHES MINIMUM AND 1.180 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR |
