| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
0.384 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.061 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.050 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
2.450 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-C-533,COND. A FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
COPPER ALLOY 170 OR COPPER ALLOY 172 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.450 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| SFTT |
SURFACE TREATMENT |
SILICON |
