| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
2.230 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.875 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.155 INCHES MINIMUM AND 0.157 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.380 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.500 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.380 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
NFURN W/THREE ADD'L. HOLES IN BRACKETS' CENTER SECTION,ONE PLAIN THRU HOLE 0.157 IN. DIA. AND TWO COUNTERBORED THRU HOLES 0.134 IN. MIN 0.138 IN. MAX THRU DIA WITH 0.160 IN. MIN 0.165 IN. MAX COUNTERBORE 82 DEGREES |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
