| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.032 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.440 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.512 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.060 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.168 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.450 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.190 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.220 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.440 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.032 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-C-576 ASSN STD SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
COPPER |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.220 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.220 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.060 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.450 NOMINAL INCHES |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.032 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.910 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.440 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
BLACK OXIDE, FINISH NO. E311 |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072 ASSN STD SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
OXIDE |
