| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
0.786 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| AHQQ |
FIRST LEG END WIDTH |
0.132 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.437 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.156 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.156 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.312 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHPW |
FIRST LEG THICKNESS |
0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-766 COND A FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL COMP 304 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
83.0 DEGREES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.700 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.154 INCHES MINIMUM AND 0.158 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.630 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.200 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 TY 1 FED SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
