| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
2.040 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.475 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
NUT |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
1.200 NOMINAL INCHES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.500 NOMINAL INCHES |
| AHPW |
FIRST LEG THICKNESS |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
2.040 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.280 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/6 T351 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK AND PLAIN |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.344 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.344 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.450 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AJFQ |
SECOND LEG END RADIUS |
1.020 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHPX |
SECOND LEG THICKNESS |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
2.040 NOMINAL INCHES |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 CL1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
