| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.250 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
2.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.312 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.255 INCHES MINIMUM AND 0.264 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.563 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.437 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS AND TAPERED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-367 T75 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.437 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.190 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
TWO HOLES ON CENTER SECTION,0.395 IN. MIN AND 0.412 IN. MAX DIA |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-83286 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PLASTIC POLYURETHANE |
