| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
MRAP - COMMON NSN - USED ON 3 MRAP VARIANTS AND 1 OTHER WEAPON SYSTEM |
| AHPZ |
CENTER SECTION HEIGHT |
70.0 MILLIMETERS NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
8.0 MILLIMETERS NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
79.0 MILLIMETERS MINIMUM AND 81.0 MILLIMETERS MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
26.0 MILLIMETERS NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
25.0 MILLIMETERS NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
19.0 MILLIMETERS MINIMUM AND 21.0 MILLIMETERS MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHQV |
FIRST LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH |
52.0 MILLIMETERS NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
25.0 MAJOR INCHES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
14.0 MAJOR INCHES |
| AHPW |
FIRST LEG THICKNESS |
8.0 MAJOR INCHES |
| AHQN |
FIRST LEG WIDTH |
79.0 MILLIMETERS MINIMUM AND 81.0 MILLIMETERS MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
72.0 MILLIMETERS MINIMUM AND 74.0 MILLIMETERS MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A36 GR 36 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
72.0 MILLIMETERS MINIMUM AND 74.0 MILLIMETERS MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
8.0 MAJOR INCHES |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-53039 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PLASTIC POLYURETHANE |
