| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
84.0 MILLIMETERS NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
6.5 MILLIMETERS MINIMUM AND 7.5 MILLIMETERS MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
70.0 MILLIMETERS NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
12.3 MILLIMETERS MINIMUM AND 12.7 MILLIMETERS MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
45.0 MILLIMETERS NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
15.0 MILLIMETERS NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
12.5 MILLIMETERS NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
6.5 MILLIMETERS MINIMUM AND 7.5 MILLIMETERS MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
70.0 MILLIMETERS NOMINAL |
| ADLK |
FIRST LEG LENGTH |
109.5 MILLIMETERS MINIMUM AND 112.5 MILLIMETERS MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A570 GR 36 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
109.5 MILLIMETERS MINIMUM AND 112.5 MILLIMETERS MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
6.5 MILLIMETERS MINIMUM AND 7.5 MILLIMETERS MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-53039 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PLASTIC POLYURETHANE |
