| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.187 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
10.0 MILLIMETERS NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
25.0 MILLIMETERS NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
41.0 MILLIMETERS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
10.9 MILLIMETERS MINIMUM AND 11.2 MILLIMETERS MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
69.7 MILLIMETERS MINIMUM AND 70.3 MILLIMETERS MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
15.0 MILLIMETERS NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.187 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
96.0 MILLIMETERS NOMINAL |
| ADLK |
FIRST LEG LENGTH |
35.0 MILLIMETERS NOMINAL |
| AJZU |
FIRST LEG STYLE |
ANGLE |
| MATT |
MATERIAL |
STEEL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
57.0 MILLIMETERS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHPX |
SECOND LEG THICKNESS |
0.187 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
